The Removal Rate of COD in Evaporation Process
COD in wastewater is mainly determined by the amount of organic matter in wastewater. And the organic matter contained in wastewater may be high-boiling or low-boiling, If it was high boiling, it would…
How to Select Construction Material of Wastewater Evaporator
Selecting the right construction material is one of the most critical factors in ensuring the reliability, service life, and operating cost of an evaporator. The optimal material depends largely on…
Operation cost of Evaporator: how to reduce operation cost
The total cost of an evaporator consists of two components: capital investment and operating cost. While the equipment investment is a one-time expenditure, the operating cost continues throughout the service…
Principle and Improvement of falling film evaporator
Principle of falling film evaporator The big difference between the falling film evaporator and the rising film evaporator is that the flowing direction is downwards rather than upwards, and that causes big changes of…
Principle and improvement of rising film evaporator
Principle and improvement of rising film evaporator Principle of rising film evaporator Once there was a strange phenomenon in a factory: there was one vertical evaporator and one horizontal evaporator,…
Commonly Used MVR: Roots Compressor
Common types of vapor compressors used in Mechanical Vapor Recompression (MVR) systems include Roots compressors, axial flow compressors, centrifugal fans, and centrifugal compressors. Among these, centrifugal compressors are typically dynamic…